Wireless, App-Based Plumbing Leak Detection System with Ethernet Hub – No Valve
- Sends an app-based notification to any iOS or Android smartphone when a fault is detected (water leak or near-freezing temperature)
- Easy to install, easy to use
- Installation does not require a plumber and causes no plumbing disruption
- Scalable at any time to add automatic water shut-off functionality
- Battery operated to maintain protection during power outages (up to 8 hours)
- Supports up to 64 total water sensors, shut-off valves and signal repeaters for wide areas of leak detection
- Operates via its own wireless system network – does not rely on local wi-fi
- Administer multiple systems from a single app
- Cloud-based Central Monitoring Station access is available for commercial multi-unit applications
Literature Downloads:
- RSC-900 Quick-Start Guide (PDF)
- RSC-900-W Technical Submittal Data Sheet (PDF)
- Central Monitoring Station Technical Submittal Data Sheet (PDF)
App Downloads:
Videos:
- RSC-900 Set-Up Video (YouTube)
- RSC-900 Mobile App Install & Set-Up Video (YouTube)
- RSC-900 Overview Video
FAQs:
Approvals:
- Communication Hub: IP Rating IEC60529
You are currently viewing the RSC-900-W kit, which features an Ethernet communications hub. This model does not include an automatic water shut-off valve.
Standard Base Kit Configurations:
Choose an Ethernet hub for enhanced Internet connectivity, or the Wi-fi version for greater installation flexibility. Choose the RSC-900-W for wireless leak detection without a shut-off valve and actuator, for applications where interrupting the water flow is either not required or not desirable. Contact us for questions about which system to choose for your application!
Model | Communications Hub | Valve Size |
---|---|---|
RSC-900-AW-x | Ethernet | 1/2" to 1-1/4" |
RSC-900-AW-WIFI-x | Wi-Fi | 1/2" to 1-1/4" |
RSC-900-W | Ethernet | None |
RSC-900-W-WIFI | Wi-Fi | None |